Does your roof needs a fresh coat of paint, but its sloped angle makes it a challenge? Then today’s article will ease the process. Angled, steeped, and sloped roofs can be difficult to paint over or renovate. However, it is never impossible.
The correct tools, safety precautions, and reliable tips will help you easily paint over a sloped roof. Talk to an expert before purchasing your devices and check your property development documents to assess the dimensions for your painting. It can make purchases more affordable.
Keeping these details in mind, here is a step-by-step process for painting over a sloped roof. I will explain each step and the safety precautions to help you bring out the most vibrant and beautiful home top. Let us begin!
Factors Related to Painting Sloped Roofs
Before painting over a sloped roof, ensure you know your house’s structure inside and out.
For example, high rooftop walls that stand over the top are not accessible with just a ladder.
So, for this, you need to learn how to thoroughly:
- Stand over a rooftop.
- Keep a steady balance.
- Walk over the roof to reach the walls over its top.
Hence, your roof’s height plays a crucial role in deciding if you can paint it in one go or need some professional tips.
Having the correct devices for roof painting and the knowledge to use them will make your project fun, exciting, and successful.
So let us check out the various tips to paint over a sloped roof.
Start With Your Roof’s Foot Boards
Before working with the roof, you must attach toe boards over the rooftop to ease your access.
While installing the roof board, do not use nails as they can loosen up, making the foot board wobbly and hazardous when standing on it.
Instead, you can use screws to secure the panels to your roof for a sturdy base.
- Keep the boards 4 feet (121.92 cm) apart from each other.
- Ensure that one panel is close to the ladder for safe stepping
- Use a clear roof patch as adhesive to seal and attach the screw holes. You will find these in home improvement stores and hardware stores nearby.
The following video will help you learn how to install a toeboard safely for all your roof-related chores:
Install a Handy Ladder Leveler
When climbing the roof to paint, you must carry a lot of equipment.
So, where do you keep them from sliding on a sloped ceiling?
The answer is in pivit ladder leveler. You can use it as a ladder platform over steeped surfaces to ensure your brushes, devices, and paint cans from slipping off the roof.
They have various benefits, especially for home renovation and repairs.
It is a great way to stabilize a platform for your equipment and keep them within a steady reach.
A ladder leveler such as the ProVisionTools, Inc. PiViT LadderTool (available on Amazon.com) has anti-slip and anti-skid rubber grippers that keep this lightweight platform stable and safe.
You can also attach it in front of the footboard for better access to your tools.
The best part is that you can even store your tools in it and carry them to the roof before installing it.
It attaches without any hassles and is an affordable purchase for your roof painting project.
The best part is that you can also hang it from your ladder while painting the lower roof portions because it has no movable parts.
Clean the Roof Before Painting
Before painting your sloped roof, prepare the surface for a clean, vibrant finish.
Now that you have your ladder, footboards, and the pivit leveler handy, it is time to scrape off the old paint and wash your roof down.
And here is how you can do it:
Wash Your Roof
Power washing your roof will eliminate the accumulated and stubborn dirt and stains from your roof.
Doing so helps enhance the paint’s finish and smooth the painting process.
First, fill your power washer with a powerful cleaning solution.
Here is how you go next:
- Attach a 35° nozzle to your washer’s wand.
- Spray the cleaning agent over your roof and distribute it within every nook and cranny.
- Depending on the dirt, the cleaning solution will take a few hours or overnight.
- Fill your washer with water and spray it over the solution-soaked roof.
- Keep the nozzle close to the top so the water does not spread around or get indoors.
RELATED: How Much Water Does A Pressure Washer Use?
Scrape Off Dirt and Leftover Paint
After washing your roof, use some:
- Sandpaper (if you have a wooden roof)
- Paint remover
- Electric sander
Remove any residual stains or leftover paint over your roof.
These can easily peel off the old painted layer and prepare your roof for some fresh coats of colors.
If these roof areas are out of your reach or too sloped, I suggest you use an extension ladder to reach those areas and use these devices.
Start Painting Your Sloped Roof
Now that your roof is clean, you can start your painting process.
You need to keep your extension ladder and pivit for accessibility for the most hard-to-reach sloped areas.
For a perfect finish, you can also opt for a brush extender that can reach the farthest areas and apply paint.
Brush extenders are just poles with a painting brush attached to their end.
These long poles are great for painting the top-most of a steep roof without any risks.
You can also change the pole’s angle, so the brush has more precision while painting.
These poles make painting flexible and help you reach the most remote roof areas to fill them in.
Here is how you can use a brush extender with ease:
You can also use a spray gun extension attached to an airless sprayer.
These spray guns have excellent reach and can paint your roof’s sidings without manual work.
The guns also control the paint amount sprayed so it does not splatter and create paint blotches on your rooftop.
Painting a sloped roof will be a seamless job if you have the right tools and equipment and are eager to learn basic home renovation skills.
Always prioritize your safety as sloped roofs are dangerous, and you might slip and hurt yourself without a proper board.
Always seek professional advice and buy the best devices to upgrade your roof painting project.
Cheers, tools owners!